產品中心
?治理理念
工作原理 / Operating Principle廢氣進入噴淋塔，降溫，并除去顆粒、粘附性物質
廢氣進入光催化等離子一體機，被降解
未被降解完全的廢氣進入活性炭罐而被吸附，達標排放
?多模塊化
廢氣由風管引入噴淋塔，經過填料層，廢氣與自上而下的液體進行氣液兩相傳質，降溫，且顆粒、粘附性物質被吸收，且廢氣經除霧板脫水除霧。
Exhaust gas is introduced into the spray tower from the duct. The gas and liquid which from the top to the below are transferred the mass through the filler layer. Then the gas is cooled, and particles, adhesion material are absorbed. The water in the exhaust is removed by the defogging plate.
光催化模塊，利用TiO2作為光催化劑，經紫外線（UV）照射后，產生活性物質羥基自由基（?OH）與活性氧（?O，H2O2），其可將部分廢氣迅速分解為CO2和H2O等
The photocatalytic module uses TiO2 as the photocatalyst. When ultraviolet irradiates TiO2, active hydroxyl radical (? OH) , and active oxygen (O, H2O2) are produced, which can quickly decomposed the exhaust gas into CO2 and H2O, etc .
高壓放電時，氣體被擊穿，產生電子、各種離子、原子和自由基在內的混合體，其可使廢氣中的大分子在極短的時間內分解為小分子
When high pressure discharges, the gas in the air is broken down, and electrons, mixture of ions, atoms and free radicals, are produced. They cause the macromolecules in the exhaust gas decompose into small molecules in a very short period of time.
橡膠輪胎、污水站、垃圾處理、醫藥化工、食品生產、印刷涂層等
Rubber tires, sewage stations, waste disposal, pharmaceutical cs
Environmental Protection
專業廢氣治理和環保咨詢的科技型企業
